Cone drying monitoring with automatic shutoff


A device to monitor the amount of residual moisture in cones during the drying process, suitable for natural and man-made fibres and featuring the automatic shutoff of the air dryer.
The data shown below refer to measurements taken at one point; however, up to four points can be used (on demand).


  • Measurement of the residual moisture content in the material, fibre selection (nr. 15 pure fibres + nr. 42 mixed fibres)
  • Wide moisture measurement range (e.g. Cotton 0.8% - 23,3%; wool 4,5% - 46,6%)
  • The machine will stop once the desired moisture level has been reached
  • Treated/dried fibre selection. In models with more than a single input for measuring residual moisture, different fibres can be selected and different dryers be connected (up to four inputs can be available)
  • All set parameters and the relevant values are recorded and residual moisture data are charted
  • Data can be downloaded via the USB port on the front panel or through an Ethernet connection
  • Data are displayed as web pages ; these can be remotely accessed on the LAN using computers, smartphones or tablets
  • Remote support (LAN access via a VPN)


  • Production quality is constantly monitored (no reprocessing required)
  • Production optimization
  • The system will store the sequence of treatments and their parameters
  • Easy to use (all machine operators shall work in the same way)
  • Easy to assemble
  • Energy saving
  • An automated processing management becomes possible
    (The dryer will stop once the desired moisture level has been reached)
  • Only requires minimal routine maintenance


Hot air cone dryers, yarn dryers in general.

Download the data sheet

Download the data sheet: