Measurement of the residual moisture content in the material, with automatic adjustment



Inline device for monitoring residual moisture in fabrics, yarns, paper, etc. for both natural and man-made fibres, providing automatic adjustment. The data shown below refer to measurements taken at one point; however, up to four points can be used (on demand).


  • Measurement of the residual moisture content in the material, fibre selection (nr. 15 pure fibres + nr. 42 mixed fibres), wide moisture measurement range (e.g. Cotton 0.8% - 23,3%)
  • Automatic machine speed or temperature adjustment based on requested and measured values of residual moisture via
  • the following outputs:
    - Speed adjustment: > 2 dry contacts (relay +/-) or (optionally) > 1 analogue output (0 - 10V)
    - Temperature adjustment (*): > 1 analogue output (0 - 4/20mA) (* modulating valve not included)
  • All set parameters and the relevant values are recorded; residual moisture and speed can be charted
  • Data can be downloaded via a USB port or through an FTP connection
  • Data are displayed as web pages ; these can be remotely accessed on the LAN using computers, smartphones or tablets
  • Remote support (LAN access via a VPN)


  • Production quality is constantly monitored (no reprocessing required)
  • Production optimization
  • The system will store the sequence of treatments and their parameters
  • Easy to use (all machine operators shall work in the same way)
  • Easy to assemble
  • Energy saving
  • An automated processing management becomes possible
  • Only requires minimal routine maintenance


Stenters, sizing machines, sanforizing machines, compactors, denim production lines, cylinder dryers, dryers in general

Download the data sheet

Download the data sheet: